A Break From the Norm

  By now you're probably fed up of seeing me post landscape after landscape.  I'm sorry but that's pretty much all i've been shooting lately.  Not even a shipwreck has crossed my path in the last couple of rolls i've shot.  I did, however, shoot a test roll when my wife got her new Pentax 67 (yes, i have converted her from digital - jackpot)!  There was one frame on it that i decided would potentially look good lithed. 

  So, i loaded up the enlarger, focused, chose some ancient Foma Neobrom 211N paper and set about making a test strip.  Imagine my surprise when the print actually developed well.  This paper is old.  Really old.  It's in a paper packet and even the lightproof sleeve is paper!  Surprising, then that it developed so well.  In fact, it developed so well i decided not to lith it and just make a straight print.  Fortunately the paper i had was the right grade (2 i think) and so i chose an exposure, burned each edge for 1 stop extra to provide a nice border and developed in Ethol LPD 1:4.  The keen-eyed among you may note that this is a cold tone paper and i'm developing it in warm tone developer.  Deliberate!  The final print gave of a lovely sharp silvery tone which was a delight to behold (until i obliterated it with toner that is).  As always my hand ended up reaching for the selenium toner.  I gave it a few minutes in 1:5 toner until it started taking on a warm brown tone, then i slipped it into some bleach (after a wash of course) and gave it a slight sepia hit in the highlights.  This resulted in the final print:

  Yes - rectangular, not square!  It's not one of my greatest images but i think it's ok.  Sometimes it's nice just to be able to blast out a quick print without having to go round and round sheet after sheet after sheet of paper (speaking of which - i have a post coming up soon which covers an absolute demon of a print).

  So what do we learn?  Sometimes it's nice to print something simple and easy to give yourself a confidence boost and to get those juices flowing again!

Tapestry

  As usual at the weekend i had a bit of time to myself as Jess was working the morning shift (got to love that morning shift)!  What better way to spend this time than by dabbling in the ancient art of printy?!  I was in a very lith mood so i chose a negative from my latest roll of film and picked a paper.  As mentioned previously i recently won a bulk load of paper on EBay, mostly old Agfa Brovira and Portriga, but i also got a small pack of 8 x 10 Fotospeed Tapestry.  Is it lithable?  Internet says yes as does the good old Facebook lith printing group.  A bit of reading in Lord Rudman's lith and toning books revealed this to be a very special paper.  It liths very well and when toned in selenium a wide range of colours are available.  I got set up and gave it a try... and what a paper!  A lovely textured base with a nice matt finish, it liths fantastically and (as we will go on to see) is phenomenal in Selenium.  This is the print i finally got at the end of the process:

  As you can see it has a very different look to my usual lith prints.  It looks (to me at least) like a watercolour painting.  The colours you can get from this paper in selenium are fantastic, but instead of me talking about it - i have pictures!

  The first print i made of this messed up because i ended up putting finger prints all over the paper.  I decided to use this print to see how far the colour change in selenium would go.  What follows is a series of pictures (taken on my camera phone - sorry for the poor quality of some of them) from 0 to 23 minutes taken every 60 seconds to demonstrate the colour changes.

  Firstly here is the original, untoned print:

Untoned, wet print (note the golden yellow colour - when dry this turned a strong pinkish colour)

30s - note the shadows immediately turning a cool purplish colour

1:30 shadows cooling off further and working up to the lower midtones

2:00

3:00 midtones starting to be affected.  Hints of purple can be seen around the boats cabin

4:00 nice separation in the cabin area and increased separation in the sky

5:00

6:00 purple tones taking over the midtones now and moving up towards the highlights.  The sandy foreground taking on a cooler steely grey tone.

7:00

8:00

9:00 cloud separation reducing slightly as the cooler grey moves towards the purple areas

10:00

11:00

12:00

13:00

14:00 the cool grey now slowly turning into a soft creamy buff colour

15:00 as the creamy colour is taking over cloud separation has reduced significantly

16:00

17:00 shadows have a slight olivey brown tone

18:00

19:00

20:00

21:00

22:00

23:00 the cream has settled into a pale creamy grey colour across the print

  As you can see the print goes through many different colour changes before settling down at around 20 minutes or so.  My plan now was to give an overall toning in selenium to get things going then wash the print and, using a paintbrush, place selenium onto the areas i wanted extra toning on.  I started with the sky so as to increase separation between the purple and yellow areas, then i toned the foreground to change it from the cool grey to a sandy yellow colour.  Then i did a little extra on the cabin and prow of the boat to help it stand out from the frame a little more.  I think the final print looks much better with these multiple pastel colours than it would with just one overall tone.  But maybe that's just me.  One thing that i should mention if you should be lucky enough to come into ownership of this paper is that it dries a different colour.  For exmaple - here is my final print when wet:

And here it is dried out prior to toning:

  As you can see we've gone from yellow to pink.  Not quite what i fancied for this print but maybe one to kkero in mind for another subject.

  I'm sure this "toner painting" could be just as easily applied to any other paper.  You probably won't get as much of an extreme colour shifting but you may get something.  It's certainly something i'll be keeping in mind to try out in the future.

Introducing... Slavich Unibrom!

  During my recent order from my usual photo supply store i got a 25 sheet pack of grade 3 Slavich Unibrom.  This is currently the only true lith paper being made since Foma altered their emulsions some months ago.  Whilst the Foma papers still work in lith they no longer give true infectious development so, alas, do not count anymore... not that i'll stop using them though!

  I had seen from my internet research that Unibrom is a hard paper to tame.  Little did i know!  Normally i can get the print i want first or second try when it comes to lith.  I only just got it on my third try with this paper!  My first print went black very rapidly and my second was way too pale.  The infectious development on this paper is ridiculous!  I am used to developing times of around 20 to 45 minutes when in lith but with Unibrom i was snatching at around 5 minutes!

  The paper itself is lovely.  It has a glossy finish that isn't too in your face but gives a lovely sheen, and with it being double weight it has a nice thickness to it that is a joy to handle.

  Im looking forward to using it some more but ill definitely have to make sure i choose the right subject.  This paper gives a very graphic look, almost like a charcoal sketch that could look horrendous with the wrong negative.  It's definitely going to take some experimenting to get the best from it.

A Slightly Delayed Wedding

  Now i'm no real fan of digital cameras but it does have its uses.  For example-weddings.  Weddings are a massive pain at the best of times, let alone when you add to pressure of photographing them.  Fortunately that's not really something i'm into.  My wife, however, is another matter.  She loves to shoot portraits so when she was asked to shoot a friends wedding she jumped at the chance.  I decided to play at being a second shooter using my trusty Bronica SQ-A and some Tri-X 400.

  The day went really well and everyone had a great time.  Jess got some great photos (and proceeded to spend the next 3 months editing them) and it was nice for me to try something a little different. 

  I developed the films in Rodinal and (as seems to be the norm for me these days) I lith printed a few onto some Orwo BN118.  Here's the three best that I made:

    Jess did a great job with her digital shots as can be seen here (and if you desire a well-priced and very talented photographer for your wedding just drop her an email).

  All in all it was a good day enjoyed by all, and its always nice to see a friend get married.

  

P.S.-Yes that is me in the band that you can see on Jess' blog...